034 X34 Carbon Fiber Full Intake System B9 Audi S4/S5 3.0 TFSI

X34 Carbon Fiber Full Intake System Features

• Developed In-House by 034Motorsport's Engineering Team
• Fits Both Left and Right Hand Drive Configurations
• High-Quality Carbon Fiber Air Duct, Airbox, and Filter Tube Construction
• High-Gloss Epoxy Finish
• OEM+ Fit and Finish
• Dyno-Proven Horsepower Torque Gains
• Improved Airflow from Factory Airbox and Intake Tube
• Enhanced Engine Induction Sounds
• Improved Throttle Response
• Massive 5" Inlet Conical Pleated Cotton Air Filter
• Large-Diameter CFD-Optimized Carbon Fiber Filter Tube
• Reduced Intake Air Temperature
• Securely Installs Using Factory Mounting Grommets
• Simple, Straightforward Installation Instructions

Dyno-Proven Performance Gains

The X34 Carbon Fiber Full Intake System for B9 Audi S4/S5 was engineered with performance in mind, and is a free-flowing replacement for the factory airbox and turbocharger inlet hose. As the development of this intake progressed, the X34 Carbon Fiber Full Intake System yielded measurable reduction in pressure drop at the turbo inlet compared to the factory airbox, with a corresponding increase in horsepower and torque throughout the powerband.

Peak Horsepower and Torque

• Stock Intake: 401 Horsepower / 424 Foot-Pounds of Torque
• X34 Intake: 412 Horsepower / 425 Foot-Pounds of Torque

Peak Gains in Horsepower and Torque

• Peak Horsepower Gain: 19 HP @ 4,950 RPM
• Peak Torque Gain: 20 FT-LBS @ 4,950 RPM

Pressure Drop Reduction

• Stock Intake: Peak Pressure Drop of 2.22 PSI at 6,500 RPM
• X34 Intake: Peak Pressure Drop of 1.64 PSI at 6,500 RPM

X34 Carbon Fiber Full Intake System Performance Data

	Factory B9 Audi S4/S5 Airbox	X34 Cold Air Intake System
Peak Horsepower	401 HP	412 HP
Peak Torque	424 FT-LBS	425FT-LBS
Peak Horsepower Gains		19 HP @ 4,950 RPM
Peak Torque Gains		20 FT-LBS @ 4,950 RPM
Peak Pressure Drop at Turbo Inlet	2.22 PSI	1.64 PSI
Peak Pressure Drop Reduction		0.58 PSI @ 6,500 RPM

 

MINIMIZING UNNECESSARY FILTER SHROUDING

034Motorsport focuses on optimizing every aspect of the intake system across a broad range of variables and compromises. A critical component of a high-flowing performance intake is the ability for air to flow around and into the filter. If the air cannot flow freely around the filter, it will be restricted from getting into it. Many aftermarket kits fit too large of a filter in an enclosure that cannot accommodate its size, thus choking the filter and reducing its overall flow. This often happens when a product is engineered for one variable at the expense of others. 034Motorsport conducted extensive tests and refined its development of the intake design to allow for maximum airflow surrounding the air filter, allowing for optimal airflow to, and through, the filter. The final result is the right size filter in the right size filter housing, creating maximum airflow and performance with OEM level filtering; the ultimate goal of any intake system. Be cautious of any intake that brags only of air filter size, without taking into account the detrimental effects of shrouding the filter.

 

What's Included

• X34 Carbon Fiber Intake Air Duct
• X34 Carbon Fiber Air Box
• X34 Carbon Fiber Inlet Pipe
• X34 Silicone Hump Hose 2.75"
• 034Motorsport 5" Inlet Air Filter
• Authentic 034 X34 Hologram Decals
• Button-Head Cap Screws M5 x 0.8 x 25mm (x3)
• Button-Head Cap Screws M5 x 0.8 x 50mm (x2)
• Nylon Locking Nuts M5 x 0.8 (x3)
• Worm Drive Hose Clamps M60x80 (x2)

Emmissions Disclaimer:

• This product is sold for racing and off-road use only.
• This product is not CARB or EPA compliant, this product is not authorized for use in California on smog controlled vehicles.
• By purchasing this product, you understand this product is sold for competition use on closed roads and is not legal for use in highway or street vehicles.